Flysky FS-i6X 6-10CH 2.4G RC Transmitter and Receiver iA6B for Drone Quadcopter

Description: Flysky FS-i6X FS I6X 2.4G RC Transmitter Controller 6CH iA6B Receiver i6 upgrade For RC Helicopter Multi-rotor drone We default ship the Mode 2, if you need Mode 1, please contact with us or remark in order.Please Note: Mode 1-- Throttle stick on rightMode 2-- Throttle stick on left FS-i6X Specifications: Item: FS-i6X RC TransmitterChannel: 6-10 (Default 6)Model Type: Fixed-Wing/Glider/HelicopterRF Range: 2.408-2.475GHzRF Power: < 20dBmRF Channel: 135Bandwidth: 500KHz2.4GHz System: AFHDS 2A / AFDHSModulation Type: GFSKStick Resolution 4096Low Voltage Warning: < 4.2VDSC port: PS/2 Port PPMChargeable: NoAntenna Length: 26mm (Dual Antenna)Weight: 392gPower: 6V DC 1.5AA*4(Battery is not included)Display: STNTransflective Display, LCD 128x64 Lattice, VA 73x39mm, LCD with white backlightSize: 174x89x190mmColor: BlackCertificate: CE0678, FCC ID: N4ZFLYSKYI6X FS-IA6B Specifications:Item Name: FS-IA6BChannel: 6Model type: fixed wing/helicopter/gliRF receiver sensitivity: -105dBmModulation: GFSKSystem type: AFHDS2A/AFHDSChannel resolution: 1024 stepsBind port: yesPower port: yes( VCC)Power: 4V -6.5V DCWeight: 14.9gAntenna lenght: 26mmSize: 47.4*262.2*15 mmCertificate: CE ,FCC Package Included:1X Flysky FS-i6X RC Transmitter1X FS-iA6B Receiver1X Bind plug1X Upgrade CableNOT included the battery If you have the fs-iA10B receiver, How to setup 10 Channels? I6X open 10 channel methodLong press the OK button for 2 seconds to enter the menu settingSelect System setup to enter,Press down to the last item Aux SWitches auxiliary switch setting to enter,
SwA B C D is set to select On to turn onCh6, changed to Ch10Long press the CANCH key to automatically save and exit Binding Setup: All receivers are bound to their respective transmitter at production time. If you want to bind it with another transmitter,please follow the steps below:1. Install the battery in the transmitter, and turn on the power.2. Open the main menu, and select "RX setup" function in the second page, then touch "Bind with a receiver" to enter bind mode.3. Insert the standard bind cable into the power supply channel.4. Connect the 6VDC power connector to any channel from CH1 to CH 6 with correct polarity to enter bind mode, The receiverLED will flash at this time.5. The transmitter will exit the bind mode automatically after having successfully bound with the transmitter.6. Pull off the bind cable and restart the receiver. Please connect the servos and other telemetry modules to the receiver to checkif everything operates normally.7. If anything is wrong, please repeat the above steps to bind again.Notice: The bound transmitter and receiver will work abnormally if the transmitter or the receiver enters the binding stateby mistake. In other words, the receiver cannot be controlled by the transmitter. If so, you need to restart the transmitter and the receiver.

Price: 61.99 USD

Location: 深圳

End Time: 2024-11-12T09:21:58.000Z

Shipping Cost: 8 USD