Dayton Audio DSPB K DSP Kernel Board and DSPB KE Kernel DSP Expansion 2 In 3 Out

Description: Add the Dayton Audio DSPB-K and DSPB-KE bundle between your input source and amplifier to add powerful DSP processing to your next powered speaker or audio project! Thanks to the built in Analog Devices ADAU1701 processor, this preamp is capable of filters, precise EQ, bass enhancement, time alignment and so much more that isnât feasible with passive crossover components. Get quick access to filter and gain settings with the built in potentiometers out of the box, but unlock the full potential of the DSPB-K by combining it with the Dayton Audio DSPB-ICP1 (sold separately), allowing it to be programmed with SigmaStudio and your Windows PC. Just make sure the switch on the DSPB-K is set to program mode, and the switch on the DSPB- ICP1 is set to USB. Check out the attached user manual and example SigmaStudio projects for more details about the capabilities of the entire DSPB series! _x000D_ Stack the DSPB-K and DSPB-KE together and they're still smaller than most passive crossover circuits. The built-in RCA and 3.5 mm input/output jacks make it easy to add to an existing amplifier or design a 2.1 audio project. _x000D_ _x000D_ _x000D__x000D__x000D_ _x000D__x000D__x000D_Integrated DSP Chip_x000D_ Create nearly limitless possibilities of EQ, crossover, bass enhancement, time alignment and more thanks to the ADAU1701 DSP chip built into the DSPB-K kernel board._x000D__x000D_ _x000D__x000D__x000D_ _x000D__x000D__x000D_Optional Programing Interface Board_x000D_ Add the DSPB-ICP1 to unlock the full potential of the DSP built onto your DSPB-K! When connected to a Windows PC, the DSPB-ICP1 allows you to program your DSPB-K with the Analog Devices SigmaStudio development tool, allowing for practically endless DSP customization including precise EQ, filters, bass enhancement, time alignment, and more that is practically impossible with passive crossovers._x000D__x000D_ _x000D_ Specifications: • DSPB-K dimensions: 1.97" W x 1.97" D x 0.5" H (50 x 50 x 12.7 mm) • Four mounting holes: 0.11" Dia. (2.8 mm), 1.77" (45 mm) apart to center • Power input: 5 VDC • Power input jack: Micro USB • DSPB-KE dimensions: 1.97" W x 1.97" D x 0.5" H (50 x 50 x 12.7 mm) • Four mounting holes: 0.11" Dia. (2.8 mm), 1.77" (45 mm) apart to center • Audio input jacks: Two RCA and one 3-conductor 3.5 mm • Audio output jacks: One 3.5 mm 3-conductor, RCA left, RCA right, and RCA sub.

Price: 38.93 USD

Location: Springboro, Ohio

End Time: 2024-11-01T20:55:30.000Z

Shipping Cost: 0 USD