Common Sense RC Lectron Pro 2S Lipo Battery 50C (7.4V/2000mAh) w/XT60 Connector

Description: LiPo Battery Overview Elevate your R/C experience with the Lectron Pro 2-Cell Lithium Polymer 2000mAh battery pack. This versatile battery is tailored to perfectly fit a wide range of 1/16 and 1/18 scale cars and trucks, providing the ideal combination of size, shape, and weight. With a 50C discharge rate, it delivers the power and performance you demand, all at an exceptional value. It's also an excellent choice for mid-size parkflyer airplanes, ensuring reliable and efficient operation. Features: 2000mAh capacity 50C continuous discharge rate XT60 connectors on the discharge leads Compatible with 1/16 and 1/18 scale cars and trucks Ideal for mid-size parkflyer airplanes IMPORTANT LITHIUM POLYMER SAFETY INFORMATION DO NOT leave a battery in your model when charging DO NOT leave lithium batteries unattended when charging ALWAYS balance charge lithium battery ALWAYS use a LiPo Safe charging bag/box YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge lithium battery packs READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. Includes: (1) Lectron Pro 2S Lipo Battery 50C (7.4V/2000mAh) with XT60 Connector (1) CSRC Adapter for XT60 Specifications Nominal Voltage: 7.4V (2S) Capacity: 2000mAh Maximum Charge Rate: 1C Discharge Rates Continuous: 50C Peak: Cell Configuration: 2S1P Watt Hours: 14.8Wh ROAR Approved: No Connectors Battery: XT60 Balance: XH Dimensions (LxWxH): 3.43x1.26x0.63in (871x32x16mm) Weight: 4.0oz (112g) About Us | View Store

Price: 32.99 USD

Location: Chico, California

End Time: 2024-10-05T16:29:07.000Z

Shipping Cost: N/A USD